FREE UK MAINLAND DELIVERY - Over £75.00 (Except Trailers)  

Jabsco Accumulator Tank - 1 Ltr


This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MATE 2.5 or any Jabsco pressure pumps as found in boats, RV's, motor caravans, coaches and similar applications.

The Accumulator Tank smooths water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system.

The even flow of water gives better control of hot water temperature especially noticeable with instantaneous gas water heaters and with showers.

The reduced on/off cycling reduces noise from the pump motor, and from shock pressures (pipe hammer). It also reduces battery drain, and gives longer pump life.



Connections: CONNECTIONS - for 13mm (½”) bore hose or threaded ports
Dimensions: DIMENSIONS - 340mm long, 120mm wide, 110mm deep
Output: VOLUME - nominal 1 litre, working capacity up to approximately 0.5 litres
Plastic vessel with internal membrane. May be mounted in any attitude
Compact size for small pressure systems (typically 1 - 2 outlets).
Supplied with 2 snap-in connectors for 13mm (½”) bore hose
Packaged Dimensions: L:37.00 x H:12.00 x W:13.00cm
Actual Weight: 0.80 Kg (Approx. 1.10 Kg packed)

Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings